Zendure SolarFlow 2400 Pro
Configuration
| Capacity | Max output | from | €/kWh |
|---|---|---|---|
| 2.4 kWh | 2.4 kW | €1,205 | €502 |
| 5.3 kWh | 2.4 kW | €1,925 | €363 |
| 8.2 kWh | 2.4 kW | €2,645 | €323 |
| 11 kWh | 2.4 kW | €3,365 | €306 |
Specifications
Cell chemistry | LFP |
Max output | 2.4 kW |
Usable capacity | 90% |
Round-trip efficiency | 90% |
Phases | 1 |
Solar input | 3000 W |
Backup power | Yes |
P1 meter | Yes |
Home Assistant | Yes |
IP rating | IP65 |
Cycle life | 6000 |
Warranty | 10 jr |
Weight | 27.8 kg |
Bi-directional inverter rated 2400 W continuous AC (charge and discharge), fixed by the inverter and not increased by adding AB3000L battery modules; capacity expands 2.4 kWh base up to ~16.8 kWh. Off-grid/backup socket with ~3200 W peak and <15 ms switchover. PV input 3000 W DC across 4 MPPT. As a Dutch plug-in/balcony unit it is typically capped to 800 W feed-in at the socket, but the hardware ceiling is 2400 W (Pro mode with proper installation). Round-trip efficiency: review measured ~90% AC-to-AC; one retailer cites 93-95% at higher loads with large losses at very low power. Usable capacity stated as roughly 80-90% (LFP), 0.9 used. Modbus not confirmed in sources (Home Assistant supported via MQTT). Single-phase; three-phase metering possible via Zendure 3CT-S but the inverter output is 1-phase.
Sources
All figures are model estimates from public data and assumptions, not a guarantee or financial advice. Real results depend on market prices, your usage and your equipment. Verify with the provider and installer before deciding.
Prices are a rough guide for now and update automatically later.