Sunpura S2400
Configuration
| Capacity | Max output | from | €/kWh |
|---|---|---|---|
| 2.4 kWh | 2.4 kW | €937 | €390 |
| 4.8 kWh | 2.4 kW | €1,480 | €308 |
| 7.2 kWh | 2.4 kW | €2,023 | €281 |
| 9.6 kWh | 2.4 kW | €2,566 | €267 |
Specifications
Cell chemistry | LFP |
Max output | 2.4 kW |
Usable capacity | 90% |
Phases | 1 |
Solar input | 2000 W |
Backup power | Yes |
P1 meter | Yes |
Home Assistant | Yes |
IP rating | IP65 |
Cycle life | 8000 |
Warranty | 10 jr |
Weight | 14 kg |
Hardware ceiling is 2400 W continuous (off-grid / dedicated circuit), with ~3600 W peak for a few seconds; the grid-tied wall-socket output is capped at 800 W. AC output stays fixed at 2400 W regardless of how many B2400 modules are added (modules only add 2.4 kWh capacity each, up to 9.6 kWh). usablePct derived from stated 90% DoD; round-trip efficiency not published. Cycle life 8000 at 90% DoD / 70% SOH end-of-life. Solar: 2 MPPT, ~1000 W each, 10-100 V, 16 A/input. weightKg=14 is the A2400 base unit; each B2400 battery module weighs 26.5 kg. Home Assistant currently view-only with read/write and local API promised; Modbus not documented. P1 meter integration via HomeWizard/Shelly/Ecotracker/IOMeter/PowerFox (meter sold separately). Single-phase.
Sources
All figures are model estimates from public data and assumptions, not a guarantee or financial advice. Real results depend on market prices, your usage and your equipment. Verify with the provider and installer before deciding.
Prices are a rough guide for now and update automatically later.