Lunergy Hub 2400 AC
Configuration
| Capacity | Max output | from | €/kWh |
|---|---|---|---|
| 5.2 kWh | 2.4 kW | €1,499 | €288 |
| 10.4 kWh | 2.4 kW | €2,499 | €240 |
| 15.7 kWh | 2.4 kW | €3,399 | €216 |
Specifications
Cell chemistry | LFP |
Max output | 2.4 kW |
Round-trip efficiency | 86% |
Phases | 1 |
Backup power | Yes |
P1 meter | Yes |
Home Assistant | Yes |
Modbus | Yes |
IP rating | IP65 |
Cycle life | 8000 |
Warranty | 10 jr |
Weight | 12.1 kg |
Hardware max continuous AC output is 2400 W on a dedicated circuit; limited to 800 W on a shared/standard wall socket. Output does NOT increase with added BP5200 battery modules (each module adds ~5.22 kWh, output stays 2400 W); it only increases by paralleling/clustering multiple Hub units in software (up to ~12 kW with 5 units). Round-trip efficiency: manufacturer spec ~86%; an independent review measured 82.3% at 800 W. AC-coupled only, no direct DC/PV MPPT input. Capacity expandable to 15.36-15.66 kWh (sources vary). Weight 12.1 kg is the Hub unit alone; one BP5200 module is 44.4 kg. usablePct not explicitly published.
Sources
All figures are model estimates from public data and assumptions, not a guarantee or financial advice. Real results depend on market prices, your usage and your equipment. Verify with the provider and installer before deciding.
Prices are a rough guide for now and update automatically later.