Indevolt SolidFlex 2000
Configuration
| Capacity | Max output | from | €/kWh |
|---|---|---|---|
| 1.8 kWh | 1 kW | €799 | €444 |
| 3.6 kWh | 2 kW | €1,250 | €347 |
| 5.4 kWh | 2.4 kW | €1,595 | €295 |
| 7.2 kWh | 2.4 kW | €2,296 | €319 |
Specifications
Cell chemistry | LFP |
Max output | 2.4 kW |
Round-trip efficiency | 81.2% |
Phases | 1 |
Solar input | 2400 W |
Backup power | Yes |
P1 meter | Yes |
Home Assistant | Yes |
Modbus | No |
IP rating | IP65 |
Cycle life | 8000 |
Warranty | 10 jr |
Weight | 21.5 kg |
Semi-solid LiFePO4. Single-unit hardware ceiling is 2400W continuous AC (bidirectional charge/discharge); output steps with added 1.8 kWh SFA1800 modules: 1000W bare, 2000W with one module, 2400W with two (or one SFA3600). Per-config capacities are approximate based on 1.8 kWh modules. Discharge to grid is capped at 800W by default per regulation but adjustable. Up to 3 units can be wired in parallel for 7200W system power and ~32.4 kWh, but that is a multi-unit install, not a single-unit scaling, so maxOutputW reflects the single-unit ceiling. Single-unit capacity expandable to ~10.8 kWh. Modbus listed as in development, not yet available. Round-trip efficiency 81.2% (AC); ~80% via PV. Backup/off-grid with 10ms switchover. PV input 2400W across 4 MPPT (600W each). Three-phase references in sources concern P1 meter compatibility, not the inverter, which is single-phase.
Sources
All figures are model estimates from public data and assumptions, not a guarantee or financial advice. Real results depend on market prices, your usage and your equipment. Verify with the provider and installer before deciding.
Prices are a rough guide for now and update automatically later.